Features
Charge the solar panel by placing it under direct sunlight at daytime. The electrical energy is stored in the storage battery. More direct sunlight, charge more electrical energy
It will work at night automatically
Human body induction function, when people go through the detected area, the light will be strong.
It will be on standby when people leave the induction area for about 10 seconds
Automatically shutdown the circuit and charge during the daytime
There modes:
A: The solar light will turn on automatically at night. The light brightness will just be half as induction function
B: Human body induction + power saving mode ( dim light ) function.
When people go through the light sensing area, the light will be strong. And the light will turn to dim after people leave the induction area
C: Human body induction function
When people go through the detected area, the light will be strong. And the light will turn off after people leave the induction area
Charging time: More than 6 hours
Tips:
Ideally, for maximum detection range, the light should be mounted 6 to 8 feet above the area to be scanned
When deciding where to mount the light, keep in mind that the motion sensor that activates this light has a field of vision of 120 degree at a maximum distance of 8 meters ( 26 feet )
To avoid unexpected triggering, the sensor should stay away from heat sources such as barbecues, air-conditioners
Powered source: Solar and Battery
Light Type: Solar Light,Outdoor Light
Light Color: White
Features: Sensor
Total LED: 32
Solar Panel : 5.5V 2.2W
Battery Voltage: 3.2V
Battery Capacity: 2 x 2200mAh
Charging time: 6 - 8 hours
Working Time: 8 hours
Material: ABS
Package weight: 0.585 kg
Package size (L x W x H): 21.600 x 13.100 x 8.600 cm / 8.504 x 5.157 x 3.386 inches
Package Contents:
1 x 32 LED Solar Motion Light,
1 x Drilling Location Map,
2 x Screws,
1 x User Manual
Description:
Solar Panel:5.5V/2.2W
Battery:3.7V/2200mAh
Led Source:32pcs 3.5w/pcs
Lumen: 550
Product Dimension: 210*125*75mm
Net Weight: 340g
Parameter:
| Item No. |
SW-K132A |
| Solar panel |
5.5V, 2.2W |
| Storage Battery |
18650 lithium battery,2200mAh 3.7V |
| Lumen |
400lm |
| Light source |
32 pcs LED 3528 |
| Output |
3.7V |
| Lighting color |
White/Warm white |
| Charging time |
6-8 Hrs |
| Work time |
After 6-8 hours charging in the sunshine, it can working 8 hours |
| Main Material |
ABS |
| Housing color |
Black/White |
| Irradiation area |
40-60 square meter |
| Products size |
210*125*75mm |
How to install:
First, choose a suitable place where can receive sunlight fully.
Second,drill two hole on the wall according to the location map,then install two screws in holes using screwdriver.
Third, use pokey thingy to switch hole on-ff at first time.
Note:
1.Please fully charge the device under the sunlight for more 8 hours at first time.
2.If you live in a place where is hailing,always have hailstone,please carefully choose our products.
The photo of the products details:
Audited Supplier 
){kind=link}