2017 New Design LED Solar Radar Motion Sensor Security LightFeatures
1. SMD2835 24-LED solar motion sensor wall light.
2. Solar-powered spotlight with efficient solar panel: no AC or DC power is needed.
3. Environmental-friendly products, high energy conversion rate.
4. The specific light-control system makes sure the LED auto on in dark environments (in the evening).
5. Automatically get charged during the daytime (enough sunshine), and light up at night.
Working Modes:
Longtime press for 5 seconds to turn on the light to the mode of first mode, press one time turn one mode (4 modes in total)
1. Light control+microwave radar sensor+dim light(When dark, the device is dim light; when motion is detected, it will turn on full light, 30s later it will turn to dim light; when no motion is detected, it is dim light.)
2. Light control+microwave radar sensor(When dark, the light will turn full light for 30s when people close it, when people leave, it will turn off; when no motion is detected, the device is off light.)
3. Bum steady mode:(Automitally turn on when dark,30% brightness, it will light for whole night if fully chraged, without motion sensor)
4. Enmergency lighting mode(high light will keep for 30 mintes, turn off light after 30 minutes)
After the switche four kinds of working mode, light turns off. The light works as the working mode which was set everyday.
Induction mode: it keeps in sensing mode when motion detected within the area of induction, It will turn to power saving mode after 10 minutes when people left.
Specification:
Item Name | Newest 24 LEDs Radar Solar Garden Lamp with Four Modes |
Solar Panel | 5V 1.5W |
Battery | 3.2V 1500mAh |
LED | 24LEDs |
LED Power | 3.5W |
Maximum Voltage | 3.65V |
Minimum Voltage | 2.65V |
Working Current | 30-800mA |
Lumen | 450lm |
LED Specification | SMD 2835 29-30lm 4000 / 6000k |
Detection Angle | greater than 180 degrees |
Charging Time | sun exposure time is greater than 6 hours |
Detection Angle | greater than 180 degrees |
Detection Distance | 5-10 meters |
Waterproof Grade | IP65 |
Application Methods:
First, completely shut out the solar panels or put it down on the desktop.
Then press the button for 5 seconds to start the lamp. Enter the first operating mode after starting. Each press of the button will change the switchover of operating modes is as follows:
1. Mrcro-mode + Induction mode
When someone comes, the sensor triggers circuit to start high light; the light will dim after someone leaving for 15 seconds. (Firstly recommended to use)
2. Induction mode
When someone comes, the sensor triggers circuit to start high light, the light will be turned off after someone leaving for 15 seconds. (Use in the places with short lighting time)
3. Always light mode
It will always light at night with no induction function.
4. Emergency light mode
Commonly use for emergency lighting, such as power failure andnight activities. The timing of emergency light mode is 30 minutes. The solar panels should be restarted or illuminated after the lights off.
5. Shutdown
The very important knowledge About solar light:
1.The LED quantity and LED brightness
SMD2835 LED parameter: luminous flux 5-30lm, power 0.1-0.5W.Simply , with the same electric current and voltage, 20pcs 30lm LEDs are brighter than 100pcs 5lm LEDs. Summary, more LED quantity doesn't mean higher brightness.
2.About battery capacity
Many batteries with fake capacity, the biggestest capacity for common 18650 lithium battery is 2400mah, but this kind battery price is very expensive. Normal capacity of 18650 lithium battery is 2200mah. The bigger capacity than 2200mah is fake capacity lithium battery. The weight of 2200mah lithium battery is about 45g, less than 43g,the lithium battery is fake capacity battery.
The standard capacity of 18650 LiFePO4 battery is 1500mah, this capacity is common use in the market.
3.The difference between lithium battery and LiFePO4 battery.
Lithium battery voltage is 3.7V, LiFePO4 battery voltage is 3.2V.
With lithium battery,After charge and discharge 300 times, the battery capacity decay to 80%.
With LiFePO4 battery, After charge and discharge 2000 times, the battery capacity decay to 80%.
LiFePO4 battery have better performance on temperature-resisting, no explosive incident happened so far. 18650 Manganese acid lithium battery is readily explosive, please keep away from Manganese acid lithium battery.
4.With the same solar panel,Is it better for larger battery capacity?
The answer is Negative. the battery capacity is depend on the power of solar panel.
The solar panel is larger, the charge efficiency is better. Such as 2 watt solar panel, charge electric current is 2W÷5.5V=360ma, there is only 5.5 hour effective charge time in sunny days, and one day charge capacity is 360ma*5.5 hour=1980mah.
So this solar panel just need 2200mah battery can full charged, no use to add larger capacity battery.
5.The LED brightness and electric current
The rated Current of 0.2W SMD2835 LED is 60mA, 5 pcs SMD2835 is 1W ,24lm LED luminous flux is 24*5=120lm/Watt; 30lm LED luminous flux is 30*5=150lm/Watt; Such as 30pcs 30lm LED in parallel, when electric current is 1800mA, luminous flux is around 30*30=900lm; when the electric current is 900mA, luminous flux is around 450lm.
6.About luminous flux(lm)
The most simple method of comparison: 25W bulb luminous flux is 250lm, 60W bulb is 600lm, if you want to know how bright the solar lights are, just need to compare with incandescent light bulb. The theoretical calculating method: such as 30pcs 26lm LED in parallel, when the electric current is 1000mA, per LED electric current is 1000mA÷30pcs=33mA, per LED luminous flux is 33mA÷60mA×26lm=14.3lm, namely the solar light luminous flux is 14.3lm×30pcs=429lm.
7.Lighting time
Only the lights with always lighting mode have the lighting time, the lights with motion sensor working time ways refer to the sensing times.
always lighting mode lights do not use the miniwatt solar panel and small capacity battery, lighting time is depend on solar panel power and battery capacity.
If need longer lighting time,with same capacity battery,that must reduce the luminance.
The lights with always mode are commonly used for emergency or special occasion, the solar lights are energy saving environmental protection products, so that the lights with always lighting mode are not belong to energy saving environmental protection products.
FAQ:
Q1: What is the Warranty for the solar wall lamps?
A1: For the solar wall lamps, we have 1 years warranty. If any quality problems on our side occured in this
period, we will take on the shipping cost and replacement.
Q2: What is colour temperature?
A2: Sunnysam's LED Lighting offer lamps in warm, natural, pure and cool white with colour temperatures
measured in Kelvin (K). The lower the colour temperature is, the warmer the light given by the LED:
• Warm white = 2700K-3200K
• Pure white = 5000K-5500K
• Cool white = 6000K-6500K
Q3: What is the working temperature for the solar wall lamps?
A3: The working temperature range is - 20ºC to 40ºC
Q4: What is the difference in sensing method?
A4: Motion sensor (PIR) + Lighting control (Most Popular)
When absence of light, if have people passthrough it would turn full bright with 30seconds; if nobody
passthrough, it would not turn on to light.
Sound control + Lighting control (Most Popular)
When absence of light, if have sound it would light 30 seconds; if no sound, it would not turn on to light.
Motion sensor (PIR) + Lighting control + Dim-light function
When absence of light, it is Dim-light; if have people passthrough it would turn full bright, 30seconds
later it turn to dim-light; if no people pass through, it is dim-light.
Sound control + Lighting control + Dim-light function
When absence of light, it is dim-light; if have sound it would full bright,30seconds later it turn to
dim-light; if no sound it is dim-light.
100% Light control
If have light it turn off, if no light it turn on, 900HA battery can light 3.5 hours, 1200HA battery can
light 4.5hours. Different sensing modes, prices are different.
Q5: Will be there any installation hardware equipped with the lamp?
A5: Yes, the accessories come with expansion pillar-hinge and screws to install the lamp.
Q6: Is there cheap shipping cost to import to our country?
A6: For small order,express will be best.And for bulk order,sea ship way is best but take much time.
For urgent orders,we suggest via air to airport plus our ship partner send to your door.
Q7: Can I get the lamps with my company logo and box design?
A7: Yes, we offer OEM and ODM service.
Q8: Can we get support if we have our own market position?
A8: Please inform us your detailed mind on your market demand,we will discuss and propose helpful suggestion for you,to find the best solution for you.