Outdoor Lighting 48 LED Solar Power Garden Lamp Motion Sensor Solar Wall Light
Specification:
| Item No. |
K1619 |
| Solar Panel |
5V, 3.2W |
| Storage Battery |
3.2V, 4500mAh Lithium Iron Phosphate Battery |
| Lumen |
900LM |
| Light Source |
SMD2835, 0.2W, 29-30 Lumen 48pcs |
| Protection Voltage |
2.65V-3.65V |
| Output Current |
3.65V: 1800mA 3.2V: 1400mA |
| Maximum Power |
6.8W |
| Lighting Color |
White 6000K/Warm white 4000K |
| Charging Time |
sun exposure time is greater than 8 hours |
| Working Time |
Motion sensor: 10secs, 500 times,
Always lighting: more than 12 hours;
30 Minutes high light each time |
| Main Material |
ABS+PC+UV |
| Housing Color |
Black/White |
| Lighting Mode |
PIR Motion sensor+dim light;
PIR Motion sensor;
Always light;
Emergency light(30 minutes high light) |
| Protection Level |
IP65 |
| Detection Angle |
120 degrees |
| Detection Distance |
5-8 meters |
Product Show
Features:
1. Solar powered sensor light, Easy installation (no battery, wire or cables required), Applied widely for courtyard, street, garden, plaza and some place where are inconvenient to connect electricity for illumination.
2. Super Bright 48LED solar lights, 900 Lumens; Waterproof, heatproof, fade resistant.
3. Four option modes-High light with Motion sensor + Dim light without Motion, High light with Motion sensor + off, Always light+No induction function, Emergency light mode.
4. Solar panel lifespan 5 years - LED Lifespan - 200,000 hours; Built-in Battery: Lithium iron phosphate battery 3.2V 4500mAh (included)
5. Solar energy charging system, light controller and body induction controller.
6. This product is an energy-saving solar energy product that can be installed conveniently.
7. Widely used in the courtyard, trails, gardens and some place where are inconvenient to connect electricity for illumination.
8. Easy installation: fixed installation.There is no need to install any wiring or other complicated installation procedures.
9. Using solar energy charging system, light controller and body induction controller. Therefore, the electric circuit is off in daytime,and when people is nearby at night, it will light without any need of manual control.
10. Adjustable angle, you can install it as you like.
Application Methods:
First, completely shut out the solar panels or put it down on the desktop. Then press the button for 5 seconds to start the lamp.Enter the first operating mode after starting. Each press of the button will change the operation modes with the lights flickering at the same time. The circulatory switchover of operating modes is as follows:
1. Motion Sensor+Dim Light
When someone comes, the sensor triggers circuit to start high light; the light will dim after someone leaving for 15 seconds (Firstly recommended to use)
2. Motion Sensor+Off
When someone comes, the sensor triggers criggers circuit to start high light; the light will be turnned off after someone leaving for 15 seconds (Use in the places with short lighting time)
3. Always light mode
It will always light at night with no induction function (Used in special places)
4. Emergency light mode
Commonly use for emergency lighting, such as power failure and night activities. The timing of emergency light mode is 30 minutes.
The solar panels should be restarted or illuminated after the lights off.
5. Shutdown
Audited Supplier 
){kind=link}