PWM solar Controller 12V 10/20A/30A Solar Charge Controller Solar Controller
Solar Controller Featuer:
* Short circuit protection
* Over-load protection
* Over charge and discharge protection
* Under voltage protection
* Reverse discharging and reverse-polarity protection
Specifications:
| Voltage |
DC12V/24V |
| Self-consuming |
10MA |
| Rated Charge Current |
20A |
| Rated Load Current |
20A |
| Over Charge |
Protection |
14.4V/28.8V |
| Floating Charge |
13.5V/27V |
| Recover |
13.2V/26.4V |
| Over Discharge |
Protection |
10.8V/21.6V |
| Recover |
12.3V/24.6V |
| Load Over Voltage |
Protection |
16.5V/34V |
| Recover |
15V/30V |
Max Open-circuit Voltage
of the Solar Panel |
25V/36V |
| Operating Temperature |
(-20ºC- +50ºC) |
Solar Controller details with photo:
How to use it:
Over-load protection Protection from the lightning strike Short circuit protection Under-voltage protection Over-charging protectionThe product can automatically manage the work of Solar Panel and battery in Solar System, which is below 120W (12V) or below 240W (24V).
Connection:
Connect the "+", "-" poles of the battery to the correct ports of controller (the third and the fourth one from left)
If load indicator (mark: load) flickers once and starts lighting after 30 seconds, you can tell the connection is correct and proceed the following operation.
Connect the "+", "-" poles of the solar panel to the correct ports of controller (the first and the second one from left)
Connect the "+", "-" poles of the load to the correct ports of controller (the fifth and the sixth one from left)
Indicator LED:
The lighting of Charge LED means the battery is being charged strongly; Flickering means the battery is in floating charge mode; Off means charging stopped
The lighting of Load LED means there is output and load can work; Off means there isn't output and the load cannot work
Notice:
Make sure the rated voltage of solar panels, batteries and loads are same and are all 12V or all 24V
The rated current of solar panels and load must be less than the rated current of controller
Note: The controller should be connected to the battery first
1. Please carefully check and confirm the voltage of the components before connecting
2. The rated current of Solar panel and load must be less the than the rated current of controller
Audited Supplier 
){kind=link}